Viessmann Vitocell 300-V EVIB-119 Indirect Water Heater, 119 Gal

A 119-gallon single-coil Vitocell 300-V stainless steel indirect water heater for big households and multi-bath homes heated by a boiler. Its AHRI first hour rating reaches 413 GPH with 301 GPH continuous draw, and an 18.3 sq. ft coil running from bottom to top heats the stored water evenly.

Tank and coil are high-alloy stainless steel, so no anode rod is needed. The soft-PET insulation jacket comes off for moving the tank through narrow doors and stairwells and goes back on once it is in place, holding standby loss to about 0.4°F per hour. Coil design flow goes as high as 22 GPM, and at 194°F boiler supply the tank typically heats from 50°F to 140°F in about 25 minutes; recovery data also covers 176°F and 158°F supply.

Domestic hot and cold connections are 1¼ in. NPT, while heating supply, heating return and recirculation are 1 in. NPT. Pressure limits are 150 psig on the domestic side and 220 psig on the heating side. The tank measures 32¾ x 35½ x 77 in. and weighs 226 lb dry.

Highlights

• 119-gallon (450 L) stainless steel tank, no anode rod

• AHRI 413 GPH first hour and 301 GPH continuous draw

• 18.3 sq. ft stainless coil reaching the tank bottom, up to 22 GPM coil flow

• Heats from 50°F to 140°F in about 25 minutes at 194°F supply

• Removable soft-PET jacket, standby loss about 0.4°F per hour

• Comes with T&P relief valve, fittings, adjustable feet and sensor clamp

Specifications

In the box

• Temperature and pressure relief valve

• Installation fittings

• Adjustable feet

• Literature set

• Sensor clamp (3 channels)

• Removable insulation