State Ultra Force Commercial Condensing Gas Water Heater, 100 Gal, 199,900 BTU

The State Ultra Force SUF100199NE is a 100-gallon modulating, condensing commercial water heater for natural gas. With 199,900 BTU/h of input and recovery of up to 392 GPH at a 60°F rise, it serves restaurants, salons, multifamily properties and light commercial sites.

Thermal efficiency reaches up to 95-96% thanks to condensing operation and a modulating pre-mix burner that scales its output with demand. A submerged combustion chamber with a helical coil gives a large heat transfer surface, supporting recovery of up to 392 GPH at a 60°F rise and 235 GPH at a 100°F rise. Permaglas glass lining and powered anode rods protect the steel tank from corrosion.

Exhaust can be configured as power vent or direct vent with horizontal (sidewall) or vertical termination, using 3 in. or 4 in. PVC, CPVC, polypropylene or AL29-4C stainless. An intelligent touchscreen control shows status and fault codes, includes on-board diagnostics and is iCOMM-ready for remote monitoring. The heater is rated to 160 psi working pressure, adjusts from 90 to 180°F, and meets Ultra-Low NOx, SCAQMD 1146.2 and NSF 5 requirements.

Highlights

• 100 gal tank with 199,900 BTU/h modulating pre-mix burner

• Up to 392 GPH at 60°F rise, 235 GPH at 100°F rise

• Condensing operation, thermal efficiency up to 95-96%

• Power or direct vent in 3 in. or 4 in. PVC, CPVC, PP or AL29-4C

• Touchscreen control with diagnostics, iCOMM-ready

• UL listed, CSA certified, ASME; Ultra-Low NOx

Specifications

Good to know

• Gas-fired appliance: it must be installed, vented and commissioned by a qualified installer in line with local codes and the manufacturer's installation manual.