State Sandblaster CSB 119 Gallon Commercial Electric Water Heater, 18 kW

A 119-gallon State Sandblaster commercial electric storage water heater with surface-mount thermostats and 18 kW of input. It suits breakrooms, restrooms, restaurants, salons, gyms and schools, recovering about 75 GPH at a 100 F rise during busy periods.

Three individually fused Incoloy immersion elements with low to medium watt density resist scaling and oxidation, wired for 208V, 3-phase service. The surface-mounted thermostats adjust from 120 to 181 F with a manual reset high-limit, and built-in fusing protects the elements, thermostats and internal wiring. A hinged front access panel, color-coded circuitry and a single-panel control box simplify service.

The glass-lined steel tank, rated for 150 psi working pressure, is protected by two anode rods and has 107 gallons of rated storage. Water enters at a 1-1/4 in. NPT bottom inlet and exits at a top outlet of the same size, with a brass drain valve. No venting is needed. For multi-tank battery setups, manifold kits and an ASME 160 psi build are available as options. It is UL listed and certified to NSF/ANSI 5.

Highlights

• 18 kW input with about 75 GPH recovery at 100 F rise

• 119-gallon nominal, 107-gallon rated storage

• Three individually fused Incoloy immersion elements, 208V 3-phase

• Surface thermostats 120 to 181 F with manual reset high-limit

• Glass-lined tank with two anode rods; 150 psi working pressure

• UL listed, NSF/ANSI 5; complies with DOE and ASHRAE/IES 90.1 standby limits

Specifications