State ProLine GS6-100-XRRT 98 Gal Tall Natural Gas Water Heater, 75,100 BTU
Buy more, save more: buy 4+, extra 15% off · Buy more, save more: buy 3, extra 10% off
The State ProLine GS6-100-XRRT is a tall, 98-gallon residential water heater for natural gas with a 75,100 BTU burner. Its 170-gallon first hour rating makes it a fit for large households with heavy, overlapping hot water use.
A glass-lined, commercial-grade steel tank wrapped in high-density fiberglass insulation limits heat loss to a standby figure of 998 BTU per hour. A CoreGard sacrificial anode adds corrosion protection, and a T&P relief valve is fitted. The atmospheric draft design uses a 4 in. draft hood outlet, ignition is by piezo push button so no electrical hookup is needed, and the burner meets Low NOx emission requirements.
Water connections are 1-1/4 in. at the top, with a 1/2 in. gas connection. The unit has a UEF of 0.58, a 27-3/4 in. diameter and 65 in. height, and conforms to ANSI Z21.10.1, CSA 4.1, ASME and NAECA standards.
Highlights
98 gal glass-lined tank with 75,100 BTU burner
170 gal first hour rating
Low NOx atmospheric draft design, 4 in. vent
Piezo push-button ignition, no electrical connection
CoreGard anode and high-density fiberglass insulation
Specifications
Brand | State |
Model | GS6-100-XRRT |
Capacity | 98 gal |
Input | 75,100 BTU |
Fuel | Natural gas |
First hour rating | 170 gal |
UEF | 0.58 |
Standby loss | 998 BTU/h |
Venting | Atmospheric, 4 in. draft hood |
Ignition | Piezo push button |
Water connections | 1-1/4 in., top |
Gas connection | 1/2 in. |
Anode | CoreGard sacrificial |
Emissions | Low NOx |
Standards | ANSI Z21.10.1, CSA 4.1, ASME, NAECA |
Diameter | 27-3/4 in. |
Height | 65 in. |
Weight | 340 lb |
Good to know
Gas-fired appliance: it must be installed, vented and commissioned by a qualified installer in line with local codes and the manufacturer's installation manual.
