Rinnai FC Series FC510N Vent-Free Fan Convector, 10,000 BTU, Natural Gas

The Rinnai FC510N is an FC Series vent-free fan convector heater fueled by natural gas. With an input range of 5,500 to 10,000 BTU/h, it brings extra warmth to hard-to-heat areas such as room additions, basements and sunrooms without any flue or ductwork.

With no flue or ductwork to carry heat outdoors, efficiency is 99.9%. Several safety systems stay active at all times: an oxygen depletion sensor (ODS) that keeps checking the room air, a tilt switch, and shut-off protection against flame loss or a power failure. The cabinet remains cool to the touch during operation.

Direct electronic ignition lights the burner, and gas connects through a 1/2 in. FNPT fitting. Self-diagnostics on board help pinpoint faults during service. The unit is 19.40 in. high, 19.20 in. wide and 9.60 in. deep and weighs 26.5 lb. Heating area varies with region and placement in the home, and professional installation is recommended.

Highlights

• Input range of 5,500 to 10,000 BTU/h on natural gas

• Vent-free design rated 99.9% efficient

• Oxygen depletion sensor, tilt switch and flame/power failure protection

• Cool-to-the-touch cabinet with onboard self-diagnostics

• Direct electronic ignition and 1/2 in. FNPT gas connection

Specifications

Good to know

• Gas-fired appliance: it must be installed, vented and commissioned by a qualified installer in line with local codes and the manufacturer's installation manual.