Rinnai EX11DTN Direct Vent Wall Furnace, Natural Gas, 11,000 BTU, Beige

The Rinnai EX11DTN is an EX DT Series ductless wall furnace that burns natural gas and vents directly outdoors through a concentric pipe. It modulates between 5,500 and 11,000 BTU/h and comes in a beige cabinet, suited to zone or supplemental heating or to working alongside an existing heating system.

Modulating control matches burner output to the heat the room calls for, which saves energy. A programmable thermostat reads in Fahrenheit or Celsius and responds to temperature shifts under 1 degree. The control panel can be locked against unintended operation, especially by children, and the cabinet surface stays cool to the touch while running.

Ignition is direct electronic, power is 120 V AC at 60 Hz, and gas enters through a 1/2 in. FNPT connection. Built-in self-diagnostics help a technician pinpoint faults during service. The cabinet measures 27.40 in. high, 18.10 in. wide and 10.10 in. deep and weighs 53 lb. Heated area depends on climate and where the unit sits in the home, and professional installation is recommended.

Highlights

• Modulating input from 5,500 to 11,000 BTU/h on natural gas

• Ductless direct vent design with concentric venting

• Programmable thermostat in °F or °C senses changes under 1 degree

• Lockable control panel and cool-to-the-touch cabinet

• Onboard self-diagnostics simplify troubleshooting

• Beige finish, 120 V AC, 1/2 in. FNPT gas connection

Specifications

Good to know

• Gas-fired appliance: it must be installed, vented and commissioned by a qualified installer in line with local codes and the manufacturer's installation manual.