Pennco Silver 1609HSID Cast-Iron Steam Boiler, 299,000 BTU, Natural Gas
Buy more, save more: buy 4+, extra 15% off · Buy more, save more: buy 3, extra 10% off
The Pennco Silver 1609HSID is a 299,000 BTU natural gas steam boiler with cast-iron sections from the Silver 16 series, intended for contractors replacing residential or commercial steam heating systems.
Cast-iron sections with push nipple connections expand evenly, keeping the heat exchanger tight over years of firing. The 6 in. steam chest supplies a steady volume of steam, and an integral draft diverter with atmospheric venting keeps the installation simple in confined boiler rooms. Connections are 2-1/2 in. NPT for water supply and return and 3/4 in. NPT for gas.
A CycleGard CG400 low-water cut-off with Intermittent Level Test pauses the burner briefly so foam can clear and the water level reads true. Further protection comes from a pressure limit control, a pop safety valve, a flame roll-out fuse link and a manual-reset blocked vent disc thermostat supplied with a spare fuse link. Power is 120 volts AC, 60 Hz, single phase, 12 amps.
Highlights
299,000 BTU natural gas steam boiler
82% AFUE
CycleGard CG400 low-water cut-off with Intermittent Level Test
Flame roll-out fuse link and manual-reset blocked vent thermostat
6 in. steam chest with integral draft diverter
2-1/2 in. NPT supply/return and 3/4 in. NPT gas inlet
Specifications
Brand | Pennco |
Model | 1609HSID |
BTU rating | 299,000 BTU |
Efficiency | 82% AFUE |
Fuel | Natural gas |
Heat exchanger | Cast iron with push nipples |
Venting | Atmospheric, integral draft diverter |
Supply / return | 2-1/2 in. NPT |
Gas inlet | 3/4 in. NPT |
Steam chest | 6 in. |
Voltage | 120 V AC |
Frequency | 60 Hz |
Phase | Single |
Amps | 12 A |
Low-water cut-off | CycleGard CG400 |
Height | 36.38 in. |
Depth | 26.50 in. |
Weight | 736 lb |
Good to know
Gas-fired appliance: it must be installed, vented and commissioned by a qualified installer in line with local codes and the manufacturer's installation manual.
