Pennco Silver 15C-8D Cast Iron Hot Water Boiler, 262,000 BTU, Natural Gas
Buy more, save more: buy 4+, extra 15% off · Buy more, save more: buy 3, extra 10% off
The Pennco Silver 15C-8D is a chimney-vented cast iron gas boiler for hot water heating, rated at 262,000 BTU input and 84.0% AFUE. It is the smaller of two 15C sizes spanning 262 to 299 MBH, with a low-profile build for space-limited boiler rooms.
Its Hydrolevel FuelSmart control first uses heat left in the boiler before firing again, and it varies water temperature with system demand. A built-in low water cut-off protects against low water conditions. The cast iron sections use cast iron push nipples, so the joints expand at the same rate and stay watertight without gaskets.
The factory-installed draft hood and automatic vent damper reduce height and footprint; installed height drops by up to 30 in. versus models with an external diverter hood. The boiler has 7 burners, a 7 in. flue, 12.7 gal water capacity and 1-1/4 in. NPT tappings. A 60 gal expansion tank is recommended, and an LP conversion kit is an option.
Highlights
262,000 BTU input at 84.0% AFUE
Hydrolevel FuelSmart control delays burner start to use residual heat
Built-in low water cut-off
Integral draft hood cuts installed height by up to 30 in.
7 burners, 7 in. flue, 12.7 gal water capacity
Cast iron push nipple section joints
Specifications
Brand | Pennco |
Model | 15C-8D |
Input | 262,000 BTU |
AFUE | 84.0% |
Fuel | Natural gas (LP conversion kit option) |
Water capacity | 12.7 gal |
Burners | 7 |
Flue diameter | 7 in. |
Water connections | 1-1/4 in. NPT |
Gas inlet | 1/2 in. NPT |
Electrical | 120 V, 60 Hz, 1-phase, under 12 A |
Expansion tank | 60 gal recommended |
Heat exchanger | Cast iron |
Height | 36.38 in. |
Depth | 26.50 in. |
Width | 27.50 in. |
Weight | 552.0 lb |
Good to know
Gas-fired appliance: it must be installed, vented and commissioned by a qualified installer in line with local codes and the manufacturer's installation manual.
