Pennco Silver 15B-095K Cast Iron Hot Water Boiler, 92,500 BTU, Natural Gas
Buy more, save more: buy 4+, extra 15% off · Buy more, save more: buy 3, extra 10% off
The Pennco Silver 15B-095K is a residential cast iron gas boiler for hot water heating with 92,500 BTU input and 84% AFUE. It is approved for natural gas or propane and carries a 4-zone rating.
Each cast iron heat exchanger is water and pressure tested before it leaves the factory. A digital operating control with diagnostics adjusts water temperature to match demand, and a factory-installed low water cut-off plus an integrated gas valve add protection against unsafe conditions.
Service is simple: the burner drawer pulls out and the burner tray lifts free for cleaning or for high-altitude and LP setup. The draft diverter hood trims installed height by up to 30%, piping and wiring can exit left or right, the vent design is atmospheric, and parts are standardized for quick replacement. Tappings are 1-1/4 in. NPT water and 1/2 in. NPT gas.
Highlights
92,500 BTU input at 84% AFUE
Digital display with diagnostics and demand-based water temperature
Factory-installed low water cut-off
Burner drawer slides out and the tray lifts free for cleaning
Draft diverter hood lowers installed height by up to 30%
Left- or right-side piping and wiring
Specifications
Brand | Pennco |
Model | 15B-095K |
Input | 92,500 BTU |
AFUE | 84% |
Fuel | Natural gas or propane |
Water capacity | 2.3 gal |
Water connections | 1-1/4 in. NPT |
Gas inlet | 1/2 in. NPT |
Electrical | 120 V AC, under 12 A |
Venting | Atmospheric |
Heat exchanger | Cast iron |
Height | 32.13 in. |
Depth | 24.13 in. |
Width | 13.38 in. |
Weight | 250.0 lb |
Good to know
Gas-fired appliance: it must be installed, vented and commissioned by a qualified installer in line with local codes and the manufacturer's installation manual.
