New Yorker CGS80-CNIH Cast Iron Steam Boiler, 245,000 BTU, Natural Gas
Buy more, save more: buy 4+, extra 15% off · Buy more, save more: buy 3, extra 10% off
In the 245,000 BTU class, the CGS80-CNIH from New Yorker, also designated CGS 80 ANC-FE 2, is a cast-iron gas steam boiler in the CGS-C Steam Series for residential heating. It offers chimney venting, electronic ignition and 82.2% AFUE on natural gas.
It draws 241,000 BTU/h, delivers a DOE heating capacity of 199,000 BTU/h and carries a Net IBR steam rating of 149,000 BTU/h, about 621 sq. ft. EDR. Cast-iron heat exchangers and corrosion-resistant stainless steel burners provide durability, and intermittent electronic ignition replaces a standing pilot. A factory vent damper reduces standby losses.
The integrated draft diverter connects through a 7 in. flue to a lined masonry or approved metal chimney. Steam supply and return tappings are 2 in. NPT and the gas inlet is 3/4 in. NPT, with 12.1 gal water content and 120 V, 60 Hz, 15 A fused power. Protection comes from a probe LWCO, a 15 psi safety valve, a pressure limit control and blocked-vent and rollout switches. An LP conversion kit is available.
Highlights
241,000 BTU/h input; 149,000 BTU/h Net IBR, about 621 sq. ft. EDR
82.2% AFUE with electronic ignition and factory vent damper
Cast-iron heat exchanger with stainless steel burners
2 in. NPT steam tappings and 7 in. flue
ASME H-stamped; AHRI and ETL listed
Specifications
Brand | New Yorker |
Model | CGS80CNI-H |
Input | 241,000 BTU/h |
DOE heating capacity | 199,000 BTU/h |
Net IBR (steam) | 149,000 BTU/h (621 sq. ft. EDR) |
Efficiency | 82.2% AFUE |
Fuel | Natural gas |
Ignition | Intermittent electronic |
Venting | Category I chimney, 7 in. flue |
Steam tappings | 2 in. NPT |
Gas inlet | 3/4 in. NPT |
Water content | 12.1 gal |
Electrical | 120 V, 60 Hz, 15 A fused |
Width | 30 in. |
Depth | 29 in. |
Height | 40-7/16 in. |
Weight | 690 lb |
Certifications | ASME H-stamped, AHRI, ETL listed |
Good to know
Gas-fired appliance: it must be installed, vented and commissioned by a qualified installer in line with local codes and the manufacturer's installation manual.
