New Yorker CGS60-CNIH Cast Iron Steam Boiler, 175,000 BTU, Natural Gas
Buy more, save more: buy 4+, extra 15% off · Buy more, save more: buy 3, extra 10% off
The New Yorker CGS60-CNIH is a chimney-vented, cast-iron gas steam boiler in the 175,000 BTU class for larger homes with one-pipe or two-pipe radiator systems. It burns natural gas at up to 82.1% AFUE and keeps a low jacket height for tight basements.
Input is 172,000 BTU/h, DOE heating capacity is 142,000 BTU/h and the Net IBR steam rating is 107,000 BTU/h, about 445 sq. ft. EDR. Stainless steel burners and metal section connectors join the cast-iron heat exchanger, while intermittent electronic ignition and a factory vent damper reduce standby losses. It carries an ASME H stamp along with AHRI and ETL listings.
Because the draft diverter is part of the jacket, no tall external draft hood is needed. It vents through a 6 in. flue into a lined masonry or approved metal chimney. Supply and return tappings are 2 in. NPT, sized for a full header and equalizer that help produce dry steam, and the gas inlet is 3/4 in. NPT. Water content is 9.3 gal, and an LP conversion kit is available.
Highlights
Input 172,000 BTU/h; Net IBR rating 107,000 BTU/h (445 sq. ft. EDR)
Up to 82.1% AFUE with electronic ignition and vent damper
2 in. NPT steam tappings for proper header and equalizer piping
Integrated draft diverter keeps overall height low
ASME H-stamped; AHRI and ETL listed
Specifications
Brand | New Yorker |
Model | CGS60CNI-H |
Input | 172,000 BTU/h |
DOE heating capacity | 142,000 BTU/h |
Net IBR (steam) | 107,000 BTU/h (445 sq. ft. EDR) |
Efficiency | Up to 82.1% AFUE |
Fuel | Natural gas |
Ignition | Intermittent electronic |
Venting | Chimney, 6 in. flue |
Steam tappings | 2 in. NPT |
Gas inlet | 3/4 in. NPT |
Water content | 9.3 gal |
Electrical | 120 V, 60 Hz |
Width | 22-1/2 in. |
Depth | 28 in. |
Height | 40-7/16 in. |
Weight | 555 lb |
Certifications | ASME H-stamped, AHRI, ETL listed |
Good to know
Gas-fired appliance: it must be installed, vented and commissioned by a qualified installer in line with local codes and the manufacturer's installation manual.
