Myers QP15-01 Quick Prime Self-Priming Sprinkler Pump, 1.5 HP

The Myers QP15-01 is a 1.5 HP Quick Prime self-priming centrifugal pump for lawn sprinkling, wash-down and tank filling where a lot of water is needed for long periods. A diffuser design re-primes automatically after the first fill, which helps it recover when a little air gets into the suction side.

With a 10 ft suction lift it moves roughly 71.6 GPM at 20 psi, maximum flow is about 85 GPM, and shut-off head is 111 ft (about 48 psi). A high-tensile gray cast iron case and motor bracket carry an engineered composite impeller, a thermoset diffuser and a carbon/ceramic shaft seal. The motor is dual-voltage 115/230V, single-phase, 60 Hz, rated for continuous duty and non-overloading. Suction and discharge are both 1-1/2 in. NPT, and total suction lift should stay within 25 ft. It is not for corrosive chemicals or flammable liquids.

Highlights

• 1.5 HP continuous-duty motor, 115/230V single-phase

• About 71.6 GPM at 20 psi with 10 ft suction lift; 111 ft shut-off head

• Automatic re-priming after initial fill

• 1-1/2 in. NPT suction and discharge; suction lift up to 25 ft

• Cast iron case with composite impeller and carbon/ceramic seal

Specifications

Available options

• Pack size: 1, 2, 5

In the box

• Pump assembly (motor and pump end)